(un peu de nouveauté en 5U malheureusement minoritaire sur le forum...
)[Vous devez être inscrit et connecté pour voir cette image]
The C104 Odyssey of Sound VCO is a voltage controlled oscillator based in the discrete core of the ARP VCOs ( 2600, Odyssey… ).
The oscillator has four waveforms available simultaneously ( sine, triangle, saw and square with variable pulse width ). The square wave pulse width goes from 10% to 90% and can be over-modulated. This feature makes possible to created sounds that are not possible in other VCOs.
In addition to the VCO, the module includes a Ring Modulator ( CMOS ) and a Diode Soft Clipping circuit that can be voltage controlled. The RM and the DSC have independent outputs.
Wide frequency range from 5Hz to 30KHz.
Perfect tracking over at least 8 octaves.
Coarse and fine frequency controls.
+/- one octave switch.
Four waveforms available simultaneously : Sine, triangle, saw, square.
Square wave pulse width 10%-90% allowing overmodulation.
Hard sync input.
Two 1V/Octv inputs.
One exponential modulation input with level control.
Ring Modulator ( RM )
VCO Square wave is internally connected to the Ring Modulator.
Diode Soft Clipping ( DSC )
Soft clipping level control.
Soft clipping level can be voltage controlled.
Two waveforms available, ( triangle and saw ) selectable by switch.
All these features makes the C104 Odyssey of Sound VCO a versatile oscillator with a sonic range not available in other VCOs.
This module is built using high quality electronic components, Switchcraft jacks, NKK switches, Cosmo knobs (the same used in the Moog Modulars) , black anodized aluminium ( like the original Moog Modulars )….